130 - Create/Update/Delete order and operation
From Host
This ProMark transaction type receives order and operation information from host (ERP system) to ProMark
| Field | Description | Data Type | Mandatory | Comment |
|---|---|---|---|---|
| 1 | Order id | Text(25) | X | |
| 2 | Order number | Text(25) | ||
| 3 | Order description | Text(80) | ||
| 4 | Item id | Text(25) | ||
| 5 | Item description | Text(80) | ||
| 6 | Project id | Text(25) | ||
| 7 | Lot id | Text(25) | ||
| 8 | Order start date | Date | ||
| 9 | Order start time | Time | ||
| 10 | Order end date | Date | ||
| 11 | Order end time | Time | ||
| 12 | Order planned numbers | Decimal number | ||
| 13 | Operation id | Text(25) | X | |
| 14 | Operation bar code | Text(25) | (X) | If not supplied then Operation id is used. |
| 15 | Operation sequence number | Text(25) | (X) | If not supplied then Operation id is used. |
| 16 | Operation description | Text(80) | ||
| 17 | Registration profile id | Text | ||
| 18 | Work centre id | Text | X | |
| 19 | Operation start date | Date | ||
| 20 | Operation start time | Time | ||
| 21 | Operation end date | Date | ||
| 22 | Operation end time | Time | ||
| 23 | Department | Text | ||
| 24 | Bonus group | Text | ||
| 25 | Job pay code | Text | ||
| 26 | Standard setup time | Time duration | ||
| 27 | Standard run time | Time duration | ||
| 28 | Standard run time unit | Decimal number | ||
| 29 | Operation number planned | Decimal number | ||
| 30 | Max. manning | Integer | 0 = no limit | |
| 31 | Standard manning | Integer | 0 = no standard manning | |
| 32 | Relative time factor | Time duration | ||
| 33 | Operation start priority | Integer | 0 = Highest | |
| 34 | Required qualifications | Text | A list of qualications | |
| 35 | Generic info | Text(250) | ||
| 36 | Blocked | Logical | ||
| 37 | Resource Id | Text | ||
| 38 | Info reference | Text(1000) | ||
| 39 | Job Type | Text | This field id used to set a specific job type. The Job types are 0 for express orders, 1 (default) is normal orders, that is typical production orders (PO) and 2 is indirect production orders (IPO). | |
| 40 | Order type | Text | This field is used to set the job type (header to order) when communicating with SAP using IDocs. | |
| 41 | Delete | Logical | Sets a delete ''flag'' that authorities ProMark to delete the order/operation. | |
| 42 | Alternative work centers | Text | List of work centers that can be chosen from a ''change work center'' dialog. Elements in the list must be separated by blanks. | |
| 43 | Plant ID | Text(25) | The Plant ID can be used to assign a registration profile to the operation. | |
| 44 | Reference to basis operation | Text | Internal field used in the integration to the Aspect/4 system | |
| 45 | Operation condition code | Text | Pseudo condition ID | |
| 46 | Planned setup start date | Date | If field 26 "Standard setup time'' is not filled out, these fields are used to calculate the standard setup time. | |
| 47 | Planned setup start time | Time | If field 26 "Standard setup time'' is not filled out, these fields are used to calculate the standard setup time. | |
| 48 | Planned setup end date | Date | If field 26 "Standard setup time'' is not filled out, these fields are used to calculate the standard setup time. | |
| 49 | Planned setup end time | Time | If field 26 "Standard setup time'' is not filled out, these fields are used to calculate the standard setup time. | |
| 50 | Planned run start date | Date | If field 27 "Standard run time'' is not filled out, these fields are used to calculate the standard run time. | |
| 51 | Planned run start time | Time | If field 27 "Standard run time'' is not filled out, these fields are used to calculate the standard run time. | |
| 52 | Planned run end date | Date | If field 27 "Standard run time'' is not filled out, these fields are used to calculate the standard run time. | |
| 53 | Planned run end time | Time | If field 27 "Standard run time'' is not filled out, these fields are used to calculate the standard run time. | |
| 54 | Operation initial state | Integer | 0: No changes, use registration profile setup if new operation. 1: Pre-released (if possible) | |
| 55 | Internal Host Field | Text | ||
| 56 | Order responsible | Text | Input a ProMark user id as responsible or if the responsible is not known by ProMark enter an ID followed by a colon and a Name. Then a responsible can still be identified by that ID or selected by the name. Ex: 4711:John Doe | |
| 57 | Operation responsible | Text | Input a ProMark user id as responsible or if the responsible is not known by ProMark enter an ID followed by a colon and a Name. Then a responsible can still be identified by that ID or selected by the name. Ex: 4711:John Doe | |
| 58 | Earliest order start date | Date | ||
| 59 | Earliest order start time | Time | ||
| 60 | Earliest order end date | Date | ||
| 61 | Earliest order end time | Time | ||
| 62 | Latest order start date | Date | ||
| 63 | Latest order start time | Time | ||
| 64 | Latest order end date | Date | ||
| 65 | Latest order end time | Time | ||
| 66 | Earliest operation start date | Date | ||
| 67 | Earliest operation start time | Time | ||
| 68 | Earliest operation end date | Date | ||
| 69 | Earliest operation end time | Time | ||
| 70 | Latest operation start date | Date | ||
| 71 | Latest operation start time | Time | ||
| 72 | Latest operation end date | Date | ||
| 73 | Latest operation end time | Time | ||
| 74 | Lock run time to lead time | Logical | If this field is given a "true" value, then Operation start date/time and Operation end date/time (fields 19-22) must be filled-in; otherwise the transaction is rejected with an error message. The following other fields are then defaulted as follows: | |
| 75 | Reference 1 | Text(40) | Customer reference fields on order. | |
| 76 | Reference 2 | Text(40) | Customer reference fields on order. | |
| 77 | Reference 3 | Text(40) | Customer reference fields on order. | |
| 78 | Use operation in ProPlanning | Logical | If true the operation is made available to ProPlanning |